Geared offset heads
Back
Before

Our geared offset head is a special drive in screwing technology, which was developed to reach screwing points that are not accessible with conventional angle heads or other standard drives. This type of drive is often used in tight or difficult-to-access areas where space is limited and a precise screw connection is required. Geared offset heads are versatile due to their compact design and are ideal for various industrial applications.

Geared offset heads

from a drive torque of 100Nm

Direct connection to hand screwdrivers or screw spindles

  • Compact output gear enables assembly even at hard-to-reach screwing points
  • Max. Output torque of the geared offset head shown: 350Nm

Geared offset head with large center distance

  • Flat design – ideal for hard-to-reach screwing points
  • Max. Output torque of the geared offset head shown: 370Nm

Geared offset head with Hold and Drive function

  • Quick-change function on the socket wrench
  • Max. Output torque of the geared offset head shown: 560Nm

Geared offset heads with Hold and Drive function with quick-change chuck

  • Max. Output torque of the geared offset head shown: 650Nm

Combination of angle head and geared offset head in a compact housing

  • Quick-change output shaft for socket wrench changes
  • Max. Output torque of the geared offset head shown: 650Nm

Geared offset heads

up to an output torque of 1000Nm

Product advantages

System design & flexibility

The particularly compact design enables use in tight or difficult-to-access areas

Available in many different sizes and versions

Performance & ergonomics

Precise transmission of torques

Robustness and designed for daily use

Process integration & operational safety

The modular design allows for expansion with additional components

Solutions Geared offset heads

Designation
Drive torque max.
Center distance geared offset head
Translation
Output torque max.
Special feature
Geared offset head 3WF100
55 Nm
102 mm
2.125
100 Nm
-
Geared offset head 2350WF350
350 Nm
81 mm
1.062
350 Nm
Direct connection hand screwdriver or built-in spindle
Geared offset head 4WF370 C SWAW
150 Nm
202 mm
2.87
370 Nm
Quick-change function of internal socket wrenches
Geared offset head 4WF560 HAD
150 Nm
104 mm
4.263
560 Nm
Hold and Drive
Geared offset head 5WF650 HAD SWF
500 Nm
112 mm
1.4
650 Nm
Hold and Drive and quick-change chuck
Geared offset head 5WF650 SWAW
500 Nm
112 mm
1.4
650 Nm
Quick-change output shaft
Geared offset head 101F820
1000 Nm
264 mm
0.889
820 Nm
Direct connection hand screwdriver or built-in spindle
Item added to quote! ✖